●Product Name: A3567 clip on soft close 3D plate hinge
●Brand: AniaPro
●Model NO.: A3567
●Material: Cold rolled steel
●Surface treatment: Nickel plated
●Diameter of hinge cup: 35mm
●Holes pitch: 48mm/52mm
●Height of base plate: H=0, H=2, H=4
●Depth of cup: 9.5mm, 11.5mm
●Opening angel:95-110 degree
●Type: Full Overlay, Half Overlay, Inset
●Package: Bulk package / 2pcs per poly bag / 1pcs per poly bag / as customized
●Application: Home furniture cabinet, wardrobe door, kitchen cabinets, bathroom cabinet door, office furniture, etc
●Cycle test: 100,000 times
●Salt spray test: more than 24hours
●Can be adjusted easily up and down or left and right by screwdriver.
●Please do not polish or paint the hinges;
●Please do not use steel hinges in water environment;
●Please do not force the cabinet door to exceed the hinges’ maximum opening angle.
●Bulk package: 200pcs per poly bag per carton
●Small poly bag package: 1pcs or 2pcs per poly bag, 200pcs per carton
●As customized: You can send us your requirements and design then we make the hinges package as you like
How to install the hinges on a cabinet door? Please see following detailed hinges installation instruction:
●First you should work out the number of hinges that you need for your cabinet door: Usually a door of 60mm high have 2 hinges each door. Taller doors or heavier doors should have more hinges.
●Fit the hinge cup into the hole in the cabinet door and screw on the hinge cup at right angle.
●Hold the cabinet door to the side board in the right place, mark the position of screws holes, then separate the hinges plate from the hinges body by just press on the clip on design.
●Mounting the hinge plate to the side board with screws.
●Assemble the hinge body and plate together by press on the end of the hinge.
●Adjust the hinge to right position by screws and then tighten the screws.
●Now go to the second hinges and install it in the same way.

Clip on soft close concealed hinges with butteryfly plate / Hydraulic hinges installation instruction