●Model NO.: A3501
●Material: Cold rolled steel
●Diameter of hinge cup: 35mm
●Holes pitch: 48mm
●Opening angel: 95-110 degree
●Type: Half Overlay
●Package: Bulk package / 2pcs per poly bag / 1pcs per poly bag / as customized
●Cycle test: 50000 times
●Salt spray test: more than 24hours
●With the two way open and close design, the door will swing softly when close, which provide the cabinet longer working life.
●Good quality material with automated production can make the hinges with better working performance of more than 50000 times cycle test.
●Can be adjusted easily up and down or left and right by screwdriver.
●Please do not polish or paint the hinges;
●Please do not use steel short arm hinges in wet environment;
●Please do not force the cabinet door to exceed the short arm hinges’ maximum opening angle.
●Bulk package: 250pcs per poly bag per carton
●Small poly bag package: 1pcs or 2pcs per poly bag, 250pcs per carton
●As customized: You can send us your requirements and design then we make the hinges package as you like
How to install the hinges on a cabinet door? Please see following detailed hinges installation instruction:
●First you should work out the number of hinges that you need for your cabinet door: Usually a door of 60mm high have 2 hinges each door. Taller doors or heavier doors should have more hinges.
●Fit the hinge cup into the hole in the cabinet door and screw on the hinge cup at right angle.
●Hold the cabinet door to the side board in the right place, mark the position of screws holes, then separate the hinges plate from the hinges body by loose the screw on the hinge.
●Mounting the hinge plate to the side board with screws.
●Assemble the hinge body and plate together by screw driver.
●Adjust the hinge to right position by screws and then tighten the screws.
●Now go to the second hinges and install it in the same way.